How to install acid proof pump correctly

acid proof pump

1. When the acid proof pump is installed, the weight of the pipeline should not be added to the pump, and there should be its own support to avoid deformation affecting the running performance and life.

2. It is an integral structure with the motor, and there is no need to align it during installation, so it is very convenient to install.

3. The anchor bolts must be tightened when the acid proof pump is installed to avoid the impact of vibration on the pump performance during startup.

4. Before installing the water pump, carefully check whether there are hard substances (such as stones, iron particles, etc.) in the pump flow channel that affect the operation of the water pump, so as to avoid damage to the impeller and the pump body during the operation of the water pump.

5. For the convenience of maintenance and safe use of acid proof pump, a regulating valve is installed on the inlet and outlet pipelines of the pump and a pressure gauge is installed near the pump outlet to ensure operation within the rated head and flow range and ensure that the pump is normal. operation to increase the service life of the pump.

6. Acid proof pump should be equipped with bottom valve when it is used for suction, and there should not be too many bends in the inlet pipeline, and there should be no water leakage or air leakage.

7. The discharge pipeline such as the check valve should be installed outside the gate valve.

8. After installation, turn the pump shaft, the impeller should have friction noise or stuck phenomenon, otherwise the pump should be disassembled to check the cause.

9. The installation method of acid proof pump is divided into rigid connection and flexible connection installation.

acid proof pump


7 Blog posts